7″ Outdoor Vandal-Resistant dome Camera System w/wall mount, rugged cast aluminum top
By: Videolarm
Sensor & Surveillance Systems
Videolarm : QRHPT4-70NA
Description
The Videolarm QRHPT4-70NA QView Vandal-resistant Rugged Dome includes 2 Hi-res day/night cameras (IR-corrected) with 4-9mm varifocal auto-iris lens and 1/4″ interline transfer CCD sensor that delivers clear images at a horizontal resolution up to 480 TVL. It offers a minimum illumination of 0.21 lux.
With a pendant mount, the dome camera can be mounted on segmented, adjustable arms that prevent movements once attached, offering a wide range of viewing angle. The multiple camera system is housed in a vandal-resistant tinted dome made of rugged cast aluminum top and polycarbonate and includes 3 captive fasteners and a sealing O-ring.
Available Configurations Include:
| QRHPT4-70NA-X2 | 7” Outdoor Vandal-Resistant dome Camera System w/wall mount, rugged cast aluminum top and polycarbonate tinted dome, 4 Hi-Res Day/Night Cameras each with a 3-9mm auto-iris, varifocal lens, plus heater/blower, UTP |
Features
QRHPT4-70NA features include:
- Multiple cameras in a single dome take up less geography than multiple cameras in multiple locations
- One housing to install (rather than three or four) saves money on the initial installation and any future service calls
- Fixed cameras require little servicing and use the least amount of hard drive space
- With multiple fixed cameras you can capture continuous footage versus monitoring one direction at a time with a single PTZ camera
- Available with 2 or 4 day/night (D&N) cameras with IR corrective lens
- Includes 3.3-12mm auto-iris lens, 7-50mm auto-iris lens for QSD models
- One 24VAC power input; separate video outputs
- Available with NVT (Network Video Technologies’) twisted pair video outputs
- Factory installed system, ready to plug n’ play
- Includes 5-year warranty
Specifications
| Signal System | NTSC |
| Image Sensor | 1/4" Interline Transfer CCD |
| Scanning | 2:1 Interlaced |
| Sync | Internal |
| Resolution | 480 |
| Signal to Noise Ratio | More than 50dB |
| Minimum Illumination | 0.21 lux |
| Lens | Focal Length: 4-9 mm |
| Video Output | 1Vp-p 75 ohm (BNC) |
| Video Enhancement | Electronic Iris: ON/OFF selectable dip switch Auto Iris Control: DC Drive Iris Control w/ adjustable level White Balance: Auto Tracking White Balance Flickerless: ON/OFF selectable dip switch Backlight Compensation: ON/OFF selectable dip switch |
| Construction | Top: Cast aluminum Dome: OptiClear polycarbonate Wall Bracket: Cast aluminum |
| Environment | Operating Temperature: -40 ~ 122°F (-40 ~ 50°C) Heater activates at: 60°F (15°C) Heater deactivates at: 80°F (27°C) Operating Temperature with Cold Weather Kit: -50°F (-45°C) |
| Power Requirements | 24VAC |
| Power Consumption | 75VA (watts) |
| Dimensions | 13.4 x 9.7 x 14.7" (340 x 247 x 373mm) |
| Weight | 12 lbs (5.5kg) |
Resources & Documents
| qview_multi_camera_system_sps.pdf | Datasheet |